|Place of Origin:||Shenzhen, China|
|Certification:||CE, ROHS, FCC, PSE|
|Minimum Order Quantity:||100pcs/box|
|Packaging Details:||1 x LED Sensor Light 1 x USB Charging Cable 2 x Adhesive Tapes 1 x Manual|
|Payment Terms:||T/T/, Western Union/, MoneyGram|
|Supply Ability:||100000pcs/ month|
|Features:||Induction Lamp||Item Type::||Night Lights|
|Battery Type::||Lithium Ion||Power Source::||DC|
|Power Generation::||Motion||Is Batteries Required::||Yes|
|USB Cable Length::||49.5cm||Light Color::||Yellow / White|
|Detection Range::||10ft||Lifespan::||Above 80000hours|
|Feature 1::||Motion Sensor Light||Led Quantity::||Hiaght Quality 12 LEDS|
|Delay Time::||15 Seconds|
Mini Ultra-thin LED closet light PIR motion sensor led lights
Specification OF PIR Motion sensor led lights:
|Color:||as picture shows|
|USB cable length:||49.5cm|
|Light color:||yellow / white|
|Yellow light color temp:||2700k|
|White light color temp:||6000k|
|Working temp:||-10~50 ℃|
|Motion angle:||≤ 100 °|
|Switch type:||press/auto sensor|
Please allow about 1cm error due to manual measurement, and slight color difference caused by light and screen.)
12LED USB Rechargeable PIR Motion Induction Sensor Closet Nightlight LampPRODUCT PICTURE
Mini Ultra-thin closet light
PIR Motion & light sensor: At dark place, it will light up automatically when you get into 10ft detection range, and auto go out 15 seconds after you get out of the range;
Suitable for stairway, drawer, under-cabinet, pantry, bedroom, wardrobe, workshop, bookshelf, attic, closet, basement, hallway, corridor, headboard, trunk lighting, etc.
ON: constant lighting
OFF: turn light off
AUTO: auto-sensing state, light up automatically in the dark when motion is
Rechargeable: Built-in 600mah lithium battery,It can last for 4 hours when fully charged at ON mode and Last 2 months at AUTO mode. Compatible with wall charger, PC USB port;
High brightness: pure white 180lm, 12pcs high bright Epistar SMD LED chips, environment friendly and low power consumption;
Compact motion sensor LED under cabinet light adopt with high bright Epistar 2835 LED light source, combining passive infrared (PIR) technology to detect motions.
Under AUTO mode, it will light up automatically in the dark when a motion is detected and auto turn off for hands-free convenience.
Easy installation: magnet and 3M adhesive tape, could be hung and stick-on No tools, screws or nuts are required when installation.
Detection range: 10ft
LED life: Above 80000h
Delay time: 15 seconds
Input voltage: 5V DC
Output voltage: 3.7V
Working temperature: -10 ~ 50℃
Motion angle: 120°
Product Size(L x W x H): 120X38X17mm
-As built-in photo sensor, it may not work in AUTO mode in daylight or bright surroundings.
-Non-waterproof, do not use it in any heavy humidity or low temp location.
-Try not to mount 2 lights so near. They may interact each other in AUTO mode.
Human body induction lamp motion sensor led night light
100% brand new and high quality.
3 sensor modes: PIR motion sensor / Light sensor / Manual control.
Compatible with wall charger, PC USB port, more convenient to charge.
High brightness with 12LEDs, environment friendly and low power consumption.
Push the button to the ON, it is in steady on state;push it to the Off, it is in off state; and push it to the Auto, it is in
both light sensor and light control state, and please allow 15-20s' time delay.
Built-in 600mah lithium battery, which can last for 4 hours when fully charged at ON mode and last 2 months at auto mode.
Motion and light sensor. At dark place, it will light up automatically when you get into 10ft detection range and automatically
light off 20 seconds later if you get out of the range.
Simple installation: an adhesive strip with magnetic fields is easily attached to and detachable from the lamp body.
No screws or nuts are required.
Practical and durable, suitable for wardrobe, cabinet, bathroom, etc.At the same time also can be hang on the wall
and used as door lamp at night.
1 x LED Sensor Light
1 x USB Charging Cable
2 x Adhesive Tapes
1 x Manual
Product Size: Approx. 12 * 3.8 * 1.7cm / 4.7 * 1.5 * 0.7inch
Product Weight: Approx. 95g
1. As built-in photo sensor, it may not work in AUTO mode in daylight or bright surroundings.
2. Non-waterproof, do not use it in any heavy humidity or low temp location.
3. Try not to mount 2 lights so near. They may interact each other in AUTO mode.